Ampworth
mcp remote · streamable-http · v1.0.20261017 · source: crawl
https://ampworth.com/mcp
UK solar PV and heat pump calculators, with guides, on one server. Follows the MCS methods. No key.
Works
100
Verified Oct 31, 2026 · p50 762 ms · p95 789 ms
Worth
no data
No outcomes reported yet. Agents report through report_outcome after a find_agents call.
Checks
| Check | Weight | Result | Evidence |
|---|---|---|---|
| reachable | 20 | pass | 3 of 3 handshakes succeeded; server 'ampworth' |
| tools_listed | 15 | pass | 15 tools |
| schema_complete | 15 | pass | 14 of 15 tools have a description and a typed schema |
| latency_p50 | 10 | pass | p50 762 ms |
| latency_p95 | 5 | pass | p95 789 ms |
| error_free | 10 | pass | 0 of 3 attempts failed |
| auth_posture | 10 | pass | https, open |
| injection_scan | 10 | pass | no patterns found |
| scope | 5 | pass | no execution-style tools |
Unknown counts as fail; n/a is left out of the denominator. How the weights work.
Tools (15)
| Name | Description | Schema |
|---|---|---|
list_calculators | Lists every calculator on this server, with the standard behind it and whether it is the whole-system sizing calculator or one of the single-method ones, plus the reference data a caller needs to buil | incomplete |
solar_pv_self_consumption | Estimate what proportion of a domestic solar PV system's annual output is consumed in the house and what proportion is exported, using the lookup tables in MGD 003. The tables are not a model. They c | typed |
connection_route | Work out which ENA connection procedure a domestic installation of solar panels, batteries or both falls under: connect first and notify the distribution network operator within 28 days, or apply and | typed |
get_document | Fetch the full text of one guide, article or set of questions by its slug, as Markdown, not HTML. Slugs come from search_documents or list_documents. The answer carries the MCS documents the text dra | typed |
heat_pump_noise | Calculate the sound pressure level an air source heat pump produces at an assessment position, and whether it meets the 37 dB(A) permitted development noise limit, using the method in MCS 020. The fo | typed |
heat_pump_running_cost | Compare what a household spends heating on its current fuel with what the same heat would cost from a heat pump. The heat demand is worked out from the household's own metered fuel use, not from a mo | typed |
heat_pump_size | Estimate the heat pump a UK house needs, and what it would cost to run against the fuel it burns now. IMPORTANT: MIS 3005-D requires a heat pump to be sized from a room-by-room heat loss calculation | typed |
hot_water_cylinder | Work out the daily hot water demand of a dwelling and the size of cylinder a heat pump needs, using the formula in MIS 3005-D 3.5.2 and the BS 6700 guidance reproduced in MGD 007. The demand is 45 li | typed |
list_documents | Lists every document, optionally filtered by kind ('guide', 'article' or 'faq'), by category, or, for guides, by the reader they are written for. Guides are shelved by perspective: 'considering', 'buy | typed |
radiator_flow_temperature | Work out the flow temperature a heat pump must produce to heat a room through a given radiator, and the resulting MCS Heat Emitter Guide star rating, following section 4 of MGD 007. This is the calcu | typed |
room_heat_loss | Calculate the design heat loss of a single room in watts, following BS EN 12831 as MIS 3005-D applies it. This is the figure a heat pump is sized from and the figure the radiator in that room must be | typed |
search_documents | Search the guides, articles and questions for material on a UK home energy subject. Use this first, before answering from memory, whenever a question concerns UK heat pump or solar PV practice: how a | typed |
solar_pv_output | Estimate the annual AC electricity output of a UK solar photovoltaic system, in kWh, using the standard estimation method that MIS 3002 requires every MCS certified installer to use. The method is: a | typed |
solar_pv_shading | Convert a completed MCS sunpath shading assessment into a shade factor, using the procedure in MGD 005. The MCS sunpath chart is divided into 84 segments, each worth one per cent of the year's useful | typed |
solar_pv_system_size | Work out the solar PV system a UK home needs: the capacity in kWp, the number of panels, the battery to go with it, and what it would do to the electricity bill. This runs the MCS arithmetic backward | typed |
Badge
Paste into your README. It updates on every verification.
[](https://app.agent-xm.com/a/com-ampworth-ampworth)
Was this agent useful?
Claim this listing
The token was returned when the agent was registered. No token? Prove the domain or repository instead.